Machine Safeguarding

(click on title for the printable PDF)

Date Inspected _____________ Date Completed _____________


Needs to be Addressed

Yes N/A

Is there a safeguarding machinery training program to instruct employees on safe methods of machine operation?

Is there sufficient supervision to guarantee that employees are following safety standards for machine safeguarding procedures?
Is there a regular program of safety standards inspection of machinery and equipment?      
Is all machinery and equipment kept clean and properly maintained?
Is sufficient clearance provided around and between machines to allow for safe operations, set up and servicing, material handling and waste removal?
Is equipment and machinery securely placed and anchored, when necessary to prevent tipping or other movement that could result in personal injury?        
Is there a power shut-off switch within reach of the operator's position at each machine?      

Can electric power to each machine be locked out for maintenance, repair, or security?


Are the noncurrent-carrying metal parts of electrically operated machines bonded and grounded?

Are foot-operated switches guarded or arranged to prevent accidental actuation by personnel or falling objects?      
Are manually operated valves and switches controlling the operation of equipment and machines clearly identified and readily accessible?      
Are all emergency stop buttons colored red?      
Are all pulleys and belts that are within 7 feet of the floor or working level properly guarded?      
Are all moving chains and gears properly guarded?      
Are splash guards mounted on machines that use coolant to prevent the coolant from reaching employees?      
Are protective safetyguard measures provided to guard the operator and other employees in the machine area from hazards created at the point of operation, ingoing nip points, rotating parts, flying chips, and sparks?      
Are machinery guards secure and arranged so that they do not pose a hazard in their use?      
If special hand tools are used for placing and removing material, do they protect the operator's hands?      
Are revolving drums, barrels, and containers that are required to be guarded by an enclosure that is interlocked with the drive mechanism, so that revolution cannot occur unless the guard enclosures is in place, so guarded?      
Do arbors and mandrels have firm and secure bearings and are they free from play?      
Are precautions in place to prevent machines from automatically starting when power is restored after a power failure or shutdown?      
Are machines free from excessive vibration when the largest size tool is mounted and run at full speed?      
If machinery is cleaned with compressed air, is air pressure controlled and personal protective equipment or other safeguards utilized to protect operators and other workers from eye and body injury?      
Are fan blades protected with a guard having openings no larger than 1/2 inch, when operating within 7 feet of the floor?      
Are saws used for ripping, equipped with anti-kick back devices and spreaders?      
Are radial arm saws so arranged that the cutting head will gently return to the back of the table when released?      

This Machine Safeguarding Checklist is NOT all-inclusive. You should add to it as necessary or skip parts that are not applicable to your company.  Carefully consider each item on safeguarding machinery, and refer to the OSHA safety standards for complete and specific guidelines that may apply to your work environment. This Machine Safeguarding list is typical for general industry, not construction or maritime. Additional economical training resources on machine safeguarding and other safety standards can be found here.

Additional information